|
|
|
DAVIS 종합 계측기 - 한국대리점 코린스계기(주)
 | |
| The CUB5 provides up to three functions in a single display package (rate indicator and two counters). |
| The CUB5 provides up to three functions in a single display package (rate indicator and two counters). The display can be toggled either manually or automatically between the rate and counter(s) display.
The CUB5 display has 0.46" (11.7 mm) high digits. The counters may be programmed for one of eight different count modes. The counters and rate indicator have separate scaling and decimal point placement for read-outs in different engineering units.
Input A accepts a signal for the Count and Rate displays. Input B accepts a signal for the Count display or direction control. In the anti-coincidence mode, both inputs are monitored simultaneously so that no counts are lost. The final count can be chosen as the sum or difference of the two inputs. The Rate Indicator has programmable low (minimum) and high (maximum) update times to provide optimal display response at any input frequency. There is a programmable user input that can be set for one of a variety of functions.
The unit is housed in a lightweight, high-impact plastic case with a clear viewing window. The sealed front panel meets NEMA 4X/IP65 specifications for wash-down and/or dusty environments, when properly installed. The CUB5 can be powered from an optional RLC Micro Line/Sensor Power Supply (MLPS0000) attached directly to the rear of a CUB5. The MLPS0000 is powered from either a 115 or 230 VAC source. |
| |
|
Features |
- LCD positive reflective or negative transmissive with yellow/green or red LED backlighting
- 0.46 inch (11.7 mm) high digits
- Programmable decimal point
- Front panel and remote reset
- Count speeds up to 20 KHz (High Speed Input)
- Operates from 9 to 28 VDC power source
- Programmable prescaler for totaling
- Bi-directional counting, up/down control
- Quadrature sensing (Up to 4 Times Resolution)
- Anti-coincidence counting (add/add & add/sub)
- Separate count and rate input mode
- Wire connections made via screw clamp type terminals
- Dual counter mode
- Count input voltage up to +28 VDC
- NEMA 4X/IP65 sealed front bezel
|
| | | SPECIFICATIONS
|
POWER |
+9 to 26 VDC @ 125 mA maximum, 85 mA typical |
|
Power Supply must be Class 2 or SELV rated. |
| RS232 Voltages |
| Receive Data Pin |
+ 30 VDC max. |
| Mark Condition |
<= 0.8 VDC |
| Space Condition |
>= 2.4 VDC |
| Transmit Data Pin: |
| Mark Condition |
-8 VDC (typ.) |
| Space Condition |
+8 VDC (typ.) |
| RS485 Voltages |
| Differential Output Voltage |
+5 VDC max. under no load |
| Differential Input Voltage |
+5 VDC max. |
| Mark Condition |
<= -0.2 VDC |
| Space Condition |
>= +0.2 VDC |
| RS485 Drive Capability |
Up to 32 RS485 receivers connected in parallel |
| RS485 Drive Disable Time |
One character time (at the set baud rate) |
| Maximum Cable Length |
RS232: 50 feet (15.24 m) |
|
RS485: 4000 feet (1219.2 m) |
| BAUD Rate |
9600 min., 115200 max. |
| Isolation |
1000 VDC |
| Environmental Conditions |
Operating Temperature Range: 0 to 50°C. |
| CAT NO. |
 |
MODEL |
|
DEscRIPTION |
|
AVAIL |
|
PRICE |
| RLCUB50000 |
|
CUB5 |
|
Miniature Dual Counter & Rate Indicator, Positive Image Reflective LCD, 9-28V DC |
|
Yes |
|
198,720 |
| RLCUB50010 |
|
CUB5 |
|
Miniature Dual Counter & Rate Indicator with Yellow/Green Backlighting, 9-28V DC |
|
Yes |
|
222,480 |
| RLCUB50020 |
|
CUB5 |
|
Miniature Dual Counter & Rate Indicator with Red Backlighting, 9-28V DC |
|
Yes |
|
222,480 |
| RLMLPS0000 |
|
MLPS |
|
OPTIONAL Microline / Sensor Power Supply FOR Miniature 8-Digit Dual Counter & Rate Indicator |
|
Yes |
|
66,960 |
| |
|
|
 | |
 |
|
 |
|
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다. |
|
 |
|
 |
|
|
 | |
|
|
|
|
이 상품에 대한 질문이 아직 없습니다.
궁금하신 사항은 이곳에 질문하여 주십시오. |
|
|
|
|
|
|
|
DAVIS 종합 계측기 - 한국대리점 코린스계기(주)
|
|
현재위치 : 
